Paper

Stickler Promatac White WG62

Category:

Description

Stickler Promatac White is a cadium free, monomeric PVC film. Produced with a high white gloss surface for excellent colour reproduction in both single and four-colour printing. Specially suitable for labels for outside use which need to be highly resistant to the weather and chemical agents.

Stickler Promatac White can be printed with a variety of print techniques from letterpress, flexo, offset and screen printing.

It is recommended to let printed graphics cure effectively for a full 72 hours before lamination and applying. This will help prevent edge-curling once it is applied. For graphics that are die-cut, it is recommended to leave 5mm of unprinted media all the way around the edge.

Face Material:

PropertiesTest MethodResult
GrammageISO 536110 +5 g/m2
CaliperISO 53480 microns
Gloss 70° (%)TAPPI T480>65
Breaking %ISO 1924>200

 

Adhesive:

AP940 Permanent acrylic

Permanent acrylic adhesive. High tack and excellent adhesion on a wide variety of materials, including apolar substrates (like PP and PE). Good ageing resistance to heat and sunlight with usage on slight rough textured surfaces. This adhesive complies with FDA 175.105

PropertiesResult
CompositionWater based acrylic
Minimum application temperature+5°C
Service temperature-30 to +120°C
ShearVery high
Tack FTM98 N/Inch?
Final tack FTM29 N/Inch

 

Backing:

WG62 One side siliconized glassine.

PropertiesTest MethodResult
CaliperISO 53455 + 10% microns
GrammageISO 53662 + 10% gsm
TransparencyDIN53 147-164> 45%

 

Laminas

PropertiesResult
Laminate shelf life24 months stored at 20°C and 50% RH.
Typical laminate caliper171 microns

 

This technical specification includes our experience and know-how regards the following:

  1. a) The composition of our products b) Their generic adhesive qualities normalised by means of the ISO procedure and regarding the international rule Finat

generally accepted in this sector. Any reference to final use is subjected to our good knowledge and opinion and does not imply specific irrevocable guarantees for final use in end product labelling and packaging. Over and above these standards the product user is responsible for assessing, testing and ensuring the specific scope of the label in certain applications by means of prior generic official approval.