Stickler Promatac Clear WK135

Stickler Promatac Clear is a cadium free, monomeric PVC film. Produced with a gloss surface and excellent clarity for excellent colour reproduction in both single and four-colour printing. Specially suitable for labels for outside use which need to be highly resistant to the weather and chemical agents.



Stickler Promatac Clear can be printed with a variety of print techniques from letterpress, flexo, offset and screen printing.

It is recommended to let printed graphics cure effectively for a full 72 hours before lamination and applying. This will help prevent edge-curling once it is applied. For graphics that are diecut, it is recommended to leave 5mm of unprinted media all the way around the edge.

Face Material:

PropertiesTest MethodResult
GrammageISO 536110 + 5 g/m2
CaliperISO 53480 microns
Gloss 70° (%)TAPPI T480>65
Breaking %ISO 1924>200


AP940 Permanent Acrylic

Permanent acrylic adhesive. High tack and excellent adhesion on a wide variety of materials, including apolar substrates (like PP and PE). Good adeing resistance to heat and sunlight with usage on slight rough textured surfaces. This adhesive complies with FDA 175.105

CompositionWater based acrylic
Minimum application temperature+5°C
Service temperature-30 to +120°C
ShearVery high
Tack FTM98 N/Inch
Final tack FTM29 N/Inch


WK135 White one side siliconized clay kraft coating.

PropertiesTest MethodResult
CaliperISO 534150 + 10% microns
GrammageISO 536135 + 10% gsm



Laminate shelf life24 months stored at 20°C and 50% RH
Typical laminate caliper245 microns


This technical specification includes our experience and know-how regards the following:

  1. a) The composition of our products b) Their generic adhesive qualities normalised by means of the ISO procedure and regarding the international rule Finat

generally accepted in this sector. Any reference to final use is subjected to our good knowledge and opinion and does not imply specific irrevocable guarantees for final use in end product labelling and packaging. Over and above these standards the product user is responsible for assessing, testing and ensuring the specific scope of the label in certain applications by means of prior generic official approval.