Paper

OLT Yupo S13

Yupo is polypropylene film specifically designed with water, chemical and oil resistance. Manufactured with a smooth matt finish, it is used for a variety of applications where durability and the dimensional strength of a synthetic label are required.

Applications:

Yupo is ideal when durability and the dimensional strength of a synthetic label are required, such

as tickets and tags, security labels and 4-colour promotional outdoor labels.

Print process:

Yugo is suited to flexography, offset, gravure, rotary letterpress, and also embosses and foil stamps with ease. It’s finish also provides exceptional thermal transfer capability, (provided correct ribbons are used- please consult your ribbon provider for correct ribbon requirements).

Category:

Description

Face Material:

PropertiesTest MethodResult
GrammageJIS-P811867+5g/m2
CaliperJIS-P812486 + 5microns

 

Adhesive:

S-Type – Permanent Acrylic S-Type is a permanent acrylic adhesive, emulsion water based, offering a perfect combination of initial tack and strong adhesive. With outstanding adhesion to most substrates including rough surfaces. S-Type is a multi-purpose adhesive suitable for high converting speeds for optimal dispensing. Recommended for use on smooth and curved substrates with a diametre 2 25mm. The adhesive complies with FDA regulation in 21 C.F.R. Section 175.105 for indirect contact applications as the label is intended for use on the outside of food packaging material.

PropertiesTest MethodResult
Peel adhesion (N/25mm)FTM 112.7
Initial tack (N/25mm)FTM 97.8
Cohesion (h)FTM 8≥3
Minimum application temperature°C5°C
Service temperature°C-20 to 70°C

 

Backing:

WG White Glassine

WG white glassine backing allows high speed conversion and consistent dispensing on a wide range of equipment.

PropertiesTest MethodResult
GrammageISO 53662 gsm
CaliperISO 53453 microns
OpacityISO 247160%

 

Laminate:

Laminate shelf life
24 months stored at 23°C/50% RH
Typical Laminate caliper
160 + 5 microns JIS-P8118 150gsm JIS-P8117

Note:

The substrate should be free of dust and lubricant before apply. Please use once unwrapped. If stock is to be returned to the storage shelf please ensure stock is wrapped and bagged to prevent surface dust and contamination. This product should be tested thoroughly under use condition to ensure it meets the requirements of the specific application.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.