|Caliper||ISO 536||80 g/m2|
|Grammage||ISO 534||86 microns|
|Smoothness||ISO 5627||190 sec/10ml|
C58 Cold Temperature Permanent
A water bourne acrylic emulsion with excellent initial and final tack. A superior cold temperature adhesive with superior adhesive force where condensation is present. Adheres easily with minimal pressure. C58 is suited to smooth consistent surfaces such as glass, stainless steel, and PET.
|Composition||Test Method||Water based acrylic|
|Initial tack||FTM 9||6.9 N/25mm|
|Peel adhesion||FTM 1||11.8 N/25mm|
|Minimum application temperature||-20°C to +40°C|
|Service temperature||-40 to +70°C|
|Food contact||Direct contact for dry non-fatty foods|
WG White Glassine
WG white glassine backing allows high speed conversion and consistent dispensing on a wide range of equipment.
|Grammage||ISO 536||62 g/m2|
|Caliper||ISO 534||53 microns|
Laminate shelf life 24 months stored at 20°C/50% RH
Typical laminate caliper 158 microns
The substrate should be free of dust and lubricant before apply. Please use once unwrapped, if stock is to be returned to the storage shelf please ensure stock is wrapped and bagged to prevent surface dust and contamination. This product should be tested thoroughly under use condition to ensure it meets the requirements of the specific application.
Base upon issue date circumstance Oji Label have tested products to be believed a reliable result the above technical information and recommendation. However it is not a guarantee & warranty since the products are used outside of Oji Label control, so we cannot take responsibilities for damage or consequence may occur when using the product. Oji Label do not authorize any parties of all give such guarantee and warranty,