ANY-CUT III DIGITAL FINISHER
Features and Benefits
10,000 labels can be cut within one hour with no retooling.
Without retooling for cutting, 10,000 labels can be cut within one hour.
The combination of the latest laser technology and vision system guarantees the quality of labels.
Cutting can be performed at precise locations through a small laser beam and a vision system. In addition, consistent levels of label quality can be guaranteed by minimizing the errors that occur during cutting.
Time and costs can be reduced by performance that serves a triple purpose.
A single cutting can perform laminating and the removal of scrap paper simultaneously. Laminating films can increase durability by protecting the surface of labels and enhance the level of luster. In addition, final labels can be conveniently produced through the removal of scrap paper.
You will become an expert with only a short-term training.
Fast and easy cutting is realized through the simple installation of roll labels and our custom software.
Production is possible without concerns about space.
any-cut III does not require a large space. It can be installed in a small space and cutting can be done whenever necessary.
Cutting and marking can be performed simultaneously.
In cutting labels, necessary information such as barcodes, numbering, QR codes, date and time can be directly marked on the labels through an exclusive software program.
Full and half cuts can be performed simultaneously.
Various cutting tasks can be produced within a single label printing operation.
Various media in terms of thickness and type are supported.
As the laser can set up the degree of cutting by fine control of intensity and speed, labels can be cut in various patterns in the medium as desired by users.
Long labels can also be cut at one time.
Labels with highly complex images can also be cut speedily.
Various images ranging from simple rectangles and circles to complex cuts such as stamp shapes can be executed easily and speedily.
Concerns over consumable costs such as the replacement of knife edges are no longer necessary.
In the case of die cutting using knives, the abrasion of knife edges requires frequent replacements. However, any-cut III does not incur consumable replacement costs.
MAX. WEB WIDTH
- 350 mm
MAX. ROLL DIAMETER
- Unwinder Ø400mm
- Rewinder Ø400mm
- 300 x 300 mm
- Sealed CO₂
- ≥ 150 Watt
FOCUS SPOT SIZE
- 270 um
LIFE OF LASER
- 10,000hours typical
- 380V x 3Ph x 50/60Hz
- L3255xD1015xH872mm / 1,000kg
- Die-cut of labels
- Die-cut of sheets
- Half-cutting / full-cutting
- Progressive numbering