We supply all types of digital printing finishers including GE DDLF330, DCL2 Modular Digital Finishing, Digital laser label die-cutter Any-Cut I, DLD 320, Any-Cut III and others. Find the right equipment today.

Showing all 7 results

  • Digital Printing Finisher

    Digital Printing Finisher GE-DDLF330

    Low Cost technology for high quality production. Short web path, mobile unit can be placed just about anywhere, extremely quite when in operation. Technology is designed to suit low skilled operator, easy setup, short web path electronic HMI user friendly system.

    cm²
  • DCL2  Modular Digital Finishing

    The new DCL Modular Digital Finishing is a fully modular converting line made for finishing of preprinted labels. The machine, which is fully servo driven, is built with the latest high-tech components available. Each module is designed for maximum performance and to cut downtime to a minimum.

    HIGHLIGHTS:

    Unwind module:

    • Intelligent servo unwind unit. Built in measuring system of mother roll and automatic set-up of web tension throughout the machine
    • Servo infeed nip station

    Printing module:

    • Modern QC flexo station with no tools needed at change of jobs
    • Spot varnish and overprinting UV/IR
    • Cold foil lamination
    • Rotary / semi-rotary versions

    Rotary die cutting module:

    • Heavy duty high speed die cutting units
    • Grafotronic Q-LOAD Quick Loading system for magnetic cylinders
    • Slide in / out in seconds
    • In register die cutting 180 m/min [590 ft/min]

    Semi-rotary die cutting module:

    • Latest technology for speeds up to 70 m /min [230 ft/min]
    • Cylinder size of 24″
    • Compensation program for existing flexible dies
    • Q-FLEX Flexible die quick change system

    Inspection module:

    • Module with camera housing, buffer and splice table
    • Waste rewind unit for multiple meters of waste

    Sheeter module:

    • Heavy duty sheeting unit with register system
    • Conveyor table with servo connection
    • QC between roll / roll roll / sheet

    Slitting system:

    • The revolutionary WIFI-SLITTING automatic knife positioning system
    • The System position the full set of shear cut knives within 10 seconds
    • Razors and standard shear knives also available

    Rewind modules:

    • Semi-turret: turret for rolls up to 420 mm [16,5″] in turret mode or 600 mm [24″] on 1 shaft
      AUTOCUT automatic web cutting and start of new cycle
    • Single & Dual rewind: for label and mono film materials with perfect and automatic tension control
      For rolls up to 600 mm [24″]

    Rewind shafts:

    • No more keys or tools and multiple screws to turn to be able to change the rewind shafts
    • With the new Q-SHAFT you turn 1 handle 180 degrees
    • Q-SHAFT is quick, easy and hassle free
    cm²
  • Digital Printing Finisher CF2

    Digital Printing Finisher CF2

    The new CF2 Compact Digital Finishing is a fully servo driven machine for finishing of digital printed labels. The machine is a compact version of our DCL2Converting Line. The CF2 has a more compact design and smaller foot print but we are using the same high-tech components as on the full version.

    HIGHLIGHTS:

    Intelligent unwind unit:

    • Built in measuring system of mother roll and automatic set up of web tension throughout the machine
    • Lift for heavy rolls available

    Drive system:

    • Latest servo technology for full web control
    • Machine in solid construction and perfectly balanced

    Printing:

    • Modern QC/flexo station with no tools needed at change of jobs
    • Spot varnish and overprinting UV/IR
    • Cold foil lamination
    • Rotary / semi-rotary versions

    Die cutting:

    • Semi-rotary high-speed version up to 70 m/min [230 ft/min]
    • Rotary version with Grafotronic Q-LOAD Quick Loading system for magnetic cylinders
    • Rotary version with speed of 180 m/min [590 ft/min]

    Slitting system:

    • The revolutionary WIFI-SLITTING automatic knife positioning system
    • The System position the full set of shear cut knives within 10 seconds
    • Razors and standard shear knives also available

    Rewind unit:

    • Semi-turret: turret for rolls up to 420 mm [16,5″] in turret mode or 600 mm [24″] on 1 shaft
      AUTOCUT automatic web cutting and start of new cycle
    • Single & Dual rewind: for label and mono film materials with perfect and automatic tension control
      For rolls up to 600 mm [24″]

    Rewind shafts:

    • No more keys or tools and multiple screws to turn to be able to change the rewind shafts.
    • With the new Q-SHAFT you turn 1 handle 180 degrees.
    • Q-SHAFT is quick, easy and hassle free.
    cm²
  • Digital Printing Finisher SCF 2

    Digital Printing Finisher SCF 2

     

    SCF Super Compact Finishing is a fully servo driven machine for finishing of digital printed labels. The machine is a compact version of the Converting Lines. A very compact design and smaller footprint but can still finish most of your digital printed jobs.

    HIGHLIGHTS:

    Drive system:

    • Latest servo technology for full web control
    • Machine in solid construction and perfectly balanced

    Printing module:

    • Modern flexo coating station with no tools needed at change of jobs
    • UV/IR dryers
    • Lamination unit

    Die cutting module:

    • Compensation program for flexible dies semi-rotary die cutting
    • K&B Gapmaster with pressure control and oiling system
    • New generation semi-rotary high-speed version up to 45 m/min [147 ft/min]

    Slitting system:

    • Shear cut slitting system (split version)
    • Razor blade slitting station

    Rewind unit:

    • Single rewind unit 600 mm [24″]
    • Dual rewind unit 2×450 mm [2×18″]

    Rewind shafts:

    • No more keys or tools and multiple screws to turn to be able to change the rewind shafts.
    • With the new Q-SHAFT you turn 1 handle 180 degrees
    • Q-SHAFT is quick, easy and hassle free
    cm²
  • Digital Laser label Cutter Unit

    Digital laser label die-cutter Any-CUT I

    Laser die-cut, any-cut is post-processing equipment for roll-to-roll type of small batch label printing. You can cut labels using a laser by controlling via desktop PC. In addition, it has functions of laminating, coating, and scrap paper removal which greatly improves productivity. any-cut is much faster than knife cutting thanks to the laser. It does not have an limitation on the location of the label, minimizing the loss of media and is cost-free for tooling, saving operating cost. any-cut works best with any-002 providing a more efficient and easy label printing system.

    Features & Benefits

    5,000 labels can be cut within one hour with no retooling.
    Without retooling for cutting, 5,000 labels can be cut within one hour.
    The combination of the latest laser technology and vision system guarantees the quality of labels.
    Cutting can be performed at precise locations through a small laser beam and a vision system. In addition, consistent levels of label quality can be guaranteed by minimizing the errors that occur during cutting.
    Time and costs can be reduced by performance that serves a triple purpose.
    A single cutting can perform laminating and the removal of scrap paper simultaneously. Laminating films can increase durability by protecting the surface of labels and enhance the level of luster. In addition, final labels can be conveniently produced through the removal of scrap paper.
    You will become an expert with only a short-term training.
    Fast and easy cutting is realized through the simple installation of roll labels and our custom software.
    Production is possible without concerns about space.
    any-cut does not require a large space.
    It can be installed in a small space and cutting can be done whenever necessary.
    Cutting and marking can be performed simultaneously.
    In cutting labels, necessary information such as barcodes, numbering, QR codes, date and time can be directly marked on the labels through an exclusive software program.
    Full and half cuts can be performed simultaneously.
    Various cutting tasks can be produced within a single label printing operation.
    Various media in terms of thickness and type are supported.
    As the laser can set up the degree of cutting by fine control of intensity and speed, labels can be cut in various patterns in the medium as desired by users.
    Long labels can also be cut at one time.
    Labels with a maximum length of 1.2m can also be cut by our software.
    Labels with highly complex images can also be cut speedily.
    Various images ranging from simple rectangles and circles to complex cuts such as stamp shapes can be executed easily and speedily.
    Concerns over consumable costs such as the replacement of knife edges are no longer necessary.
    In the case of die cutting using knives, the abrasion of knife edges requires frequent replacements. However, any-cut does not incur consumable replacement costs.
    cm²
  • Any-Cut III

    Anytron laser die-cut, any-cut Ⅲ is the most compact size among the A3 laser cutting machines. It is post-processing equipment for roll-to-roll type of small batch label printing. You can cut labels using a laser by controlling via desktop PC. In addition, it has functions of laminating, coating, and scrap paper removal which greatly improves productivity. It does not have an limitation on the location of the label, minimizing the loss of media and is cost-free for tooling, saving operating cost. any-cut III works best with digital label printer providing a more efficient and easy label printing system.

    cm²